An unshielded mining cable is the right choice in many installations. A shielded cable is the right choice in others. The difference is not a premium feature; it is an engineering decision based on the interference environment and the consequence of a bad signal.
Unshielded multi-core cable works well for relay logic, contactor control, indication and interlocking where the circuit is short, the current is relatively high and the cable is not routed beside drives or switching equipment. It is easier to terminate, more flexible and usually more economical. In a clean surface substation or a short roadway spur, an unshielded construction is often the sensible choice.
Add a screen when a low-level signal shares a roadway or an enclosure with variable-speed drives, shearer or conveyor starters, welding equipment or high-current switching. Add it when the cable runs parallel to power conductors for a long distance — which, in a mine roadway, is almost always. Add it when a signal is used for measurement rather than indication, or when a false reading has a real safety consequence: gas monitoring, methane drainage, emergency stop and conveyor slip circuits all fall into that group.
Copper braid is mechanically robust and performs well across a wide frequency range. It is the usual choice for drive and servo environments and for trailing cables that are handled on shift. Aluminium/polyester foil with a drain wire is lighter and less expensive, and is effective for static screening. Foil is more vulnerable to damage at termination, so the drain wire and the earth connection need care.
A screen that is not terminated properly is not a screen. The earth connection should be low impedance, the screen should be continuous through glands and couplers, and the drain wire should be bonded at the intended point. In mining, the correct earthing strategy also has to satisfy the site electrical safety rules, so it should be confirmed by the project electrical engineer rather than assumed from the datasheet.
ZMS supplies both constructions in PVC, LSZH and rubber, with optional armour. See the shielded mining control cable and mining control cable ranges, or send us the application and we will help you compare the options.
Mining shielded control cable · Mining armoured power cable · Mining intrinsically safe communication cable